Love the Angle grinder, received it in 1 day! Couldn't believe how fast it was delivered. Will be...


What a great site, I have just purchased the Hitachi Angle Grinder with bonuses. This site was...

Lea & Brett

Incredible customer service! Prompt, polite, generous. Over and above. Thank you so much!


Great website! Easy to use - pictures of products are clear and product information makes it easy...


I received the cordless drill I only ordered yesterday well packed and super fast. Thank you....


Thanks for your efforts, I really appreciate your inquiries and the speed of your replies.


Thank you for your wonderful customer service, your staff were very helpful and I am very grateful!


Many thanks for your prompt and informative service. Really pleased that you are able to help us....


I recently made a purchase from you and are delighted with your service. Thanks for the...


Fuller Ultra Clear Flexible Sealant 300g

Click on the above image to view a larger picture

More Pictures

Availability: In stock


RRP: $11.54

Save: $1.65
You could receive 50 Loyalty Points for writing a review and/or rating this product.

Quick Overview

Fuller Ultra Clear sealant is an easy to use, flexible, water clean up sealant, when wet is white but dries clear and will not attack plastics or metals.

Fuller Ultra Clear sealant can be used for interior and exterior applications and can be painted if required.

This product is designed to be versatile and useful in many household applications.

Fuller Ultra Clear  has ± 25% joint movement.




This product can be used on

  • Roofing Glass
  • Polycarbonate cement sheet
  • Masonry gypsum
  • Metal mortar
  • Timber
  • Most plastics (pretest)
  • Fibreglass

How to use product

  • Pepare joint surfaces by making them clean, dry, sound and free of dirt, dust, oil, old sealant or contamination and pooled water.
  • Clean metals with a solvent.
  • Don't use where a silicone has been previously used
  • Sand painted surfaces.
  • Mask area for clean finish and easy clean up.
  • At least one porous surface is required to allow the product to cure in the times stated below.
  • Note: Ultra clear is white when applied, and progresses to clear as the sealant cures. Ensure substrate temperatures are above 5°C.
  • Cut tip off the Fuller Ultra Clear cartridge and fit the nozzle on.
  • Cut the nozzle between 3-5mm diameter and put in a cartride gun.
  • Hold gun at a 45º angle.
  • Apply sealant in a continuous steady flow, by pushing sealant ahead of the nozzle, so that it is
    wetting both surfaces.
  • Use a wet spatula to tool to a smooth finish (about 10mins).
  • Protect sealant from water until it dries
  • Remove masking tape
  • To clean uncure sealant, use water.
  • To clean cured silicone trim with sharp blade. Don't undercut seal.
  • Fuller Ultra Clear sealant will develop full bond strength in 5-7 days depending on bead size, conditions and substrates.Ultra clear relies on water evaporation to cure; therefore applying sealant on non porous substrates will extend curing time. At least one porous surface is required to
    allow the product to cure in the times stated.
  • Fuller Ultra clear sealant can be painted with water based paints once tack free (approximately 30
  • If using oil based paint, allow 5-7 days curing before painting or until it dries clear

Not recommended for

  • Permanent water immersion e.g. fish tanks, swimming pools.
  • Situations where movement exceeds ± 25% of the original joint dimensions.
  • Areas where high abrasion, e.g. foot traffic is expected.
  • Only to be used where there is at least one absorbent surface.
  • Do not use in areas where water is likely to ‘pool’.
  • Do not enclose in a lap joint between non porous surfaces.
  • Sealant must be protected from water until cured

Additional Information

SKU 057057
Type No
Brand No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Earn 1 Loyalty Point for each approved tag you make.
Related Products