Many thanks for your prompt and informative service. Really pleased that you are able to help us....

Phillip

I received the cordless drill I only ordered yesterday well packed and super fast. Thank you....

Will

What a great site, I have just purchased the Hitachi Angle Grinder with bonuses. This site was...

Lea & Brett

I recently made a purchase from you and are delighted with your service. Thanks for the...

Chris

Love the Angle grinder, received it in 1 day! Couldn't believe how fast it was delivered. Will be...

Dene

Thank you for your wonderful customer service, your staff were very helpful and I am very grateful!

Ray

Thanks for your efforts, I really appreciate your inquiries and the speed of your replies.

Susan

Great website! Easy to use - pictures of products are clear and product information makes it easy...

Peter

Incredible customer service! Prompt, polite, generous. Over and above. Thank you so much!

Sky

Fuller roof & Gutter Silicone Sealant 300g - Translucent

Click on the above image to view a larger picture

More Pictures

Availability: In stock

$7.59

RRP: $8.39

Save: $0.80
You could receive 50 Loyalty Points for writing a review and/or rating this product.

Quick Overview

Fuller Roof & Gutter is a premium quality, neutral cure silicone sealant specially formulated where a weatherproof and flexible seal is required.


With +/25% joint movement capability, it is ideal for roofs and gutters, skylights, ductwork and vents, and rainwater systems.


Approved for use in contact with potable water.


Fuller Roof & Gutter has resistance to temperatures between - 50°C to 150°C, vibration, saging, weathering and UV radiation.


This products neutral cure stops it from corroding concrete or zinc coated/glavanised steel


Fuller Roof & Gutter is resistant to water, salt water, grease, oils, fuels, defrosting liquid, detergents, aliphatic fats, mildew, weak acids and bases (pre testing required).






Details

Materials this product can be used on

  • Steel Aluminium
  • Galvanised iron
  • Masonry
  • Ceramic tiles
  • Terracotta
  • Lead
  • Zincalume
  • Glass
  • Most plastics (pretest)
  • Fiberglass

How to use product

  • Mask all areas not requiring sealant. Paint will not adhere to silicone. Complete any painting and
    allow to thoroughly dry before applying sealant.
  • Pepare joint surfaces by making them clean, dry, sound and free of dirt, dust, oil, old sealant or contamination and pooled water.
  • Clean surfaces with a methylated spirits, using a lint free cloth.
  • Mask area for clean finish and easy clean up.
  • Cut tip off th Fuller Ultra Clear cartridge and fit the nozzle on.
  • Cut the nozzle between 3-5mm diameter and put in a cartride gun.
  • Hold gun at a 45º angle.
  • Apply sealant in a continuous steady flow, by pushing sealant ahead of the nozzle, ensure it wets both sides of the joint.
  • Use a wet spatula to tool to a smooth finish (about 5mins).
  • Remove masking tape
  • To clean uncure sealant, use mineral turps.
  • To clean cured silicone trim with sharp blade. Don't undercut seal.
  • Fuller Roof & Gutter sealant is tack free in 13-25mins & will develop full bond strength in 7 days depending on bead size, conditions and substrates.Ultra clear relies on water evaporation to cure; therefore applying sealant on non porous substrates will extend curing time. At least one porous surface is required to allow the product to cure in the times stated.






Not recommended for

  • Structural glazing
  • Use below ground
  • Permanent or continuous water immersion
  • Pluging or sealing on burst water pipes or rusted guttering
  • Pre test on coated surfaces to establish suitability
  • Use on marble or other highly porous stone - finish may be affected
  • Using on copper or brass as discolouration may occur
  • Powder coated metal surfaces may have high wax contents. Ensure that these surfaces are solvent cleaned. Pre test silicone to ensure adhesion to surface
  • Situations where movement exceeds ± 25% of the original joint dimensions
  • Joint depths exceeding 20mm
  • Use on polycarbonate plastic sheeting
  • Use where high abrasion, e.g. foot traffic is expected
  • Using to construct aquariums
  • Not paintable
  • Use on freshly painted surfaces
  • Use on bituminous surfaces
  • Use on materials that bleed oils, plasticisers or solvents as this will affect adhesion
  • Not a fire rated sealant
  • Use in direct contact with silver coating of mirrors (e.g. on the edge of the mirror)
  • Will not cure in absence of atmospheric moisture







Additional Information

SKU 670742
Type No
Brand Fuller

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Earn 1 Loyalty Point for each approved tag you make.
Related Products